- Go to the Cisco Unified Communications Manager web administration page, and choose System> Service Parameters. …
- Choose the publisher server from the Server drop-down list.
- Choose Cisco call manager service from the Service drop-down list.
- Select the Maximum MeetMe Conference Unicast parameter under the Clusterwide Parameters (Service ) section. …
How does a Meet-Me conference call work?
Everyone who dials the same Meet-Me number joins the conference together For example, some people decide to have a conference call at 17:00 hours and decide to use the conference number 5555 for the next thirty minutes. At 17:00, all the people who need to join this conference dial the Meet-Me number 5555.
How do I configure the Meet-Me SoftKey for a conference?
Configure the Meet Me Number. Refer to Meet-Me Number/Pattern Configuration for more information. Create a SoftKey Template to include the Meet-Me Softkey. Associate this template to the phones that will initiate the conference. There is currently no verification procedure available for this configuration.
How do I configure a hardware conference bridge with the CUCM?
By default, the CUCM has a software conference bridge configured that can be used. In order to configure a hardware conference bridge, refer to Configuring and Using a Hardware Conference Bridge with Cisco CallManager and a Catalyst 6000 WS-X6608 Port.
How do I set up a Meet-Me number/pattern?
In the CUCM Administration page, navigate to Call Routing and select Meet-Me Number/Pattern. Click Add a New Meet-Me Number, as shown in this image. Configure a directory number or a pattern.
How do you configure meet me on Cucm?
Choose the publisher server from the Server drop-down list. Choose Cisco call manager service from the Service drop-down list. Select the Maximum MeetMe Conference Unicast parameter under the Clusterwide Parameters (Service ) section. You can increase or decrease the meet-me sessions for the conference.
How do you do a conference call on a Cisco softphone?
Start a Conference Call on Cisco Deskphones and IP PhonesPress the conf softkey during an active call. The first call is placed on hold, a. second line is opened, and you hear a dial tone.Dial the second person’s telephone number.Press the “conf” softkey again. All 3 parties are connected in the conference. call.
What is Cisco Meet Me conferencing?
Meet-Me Conferencing Overview Users can use Meet-Me Conferencing to set up or join conferences. A user that sets up a conference is called the conference controller. A user that joins a conference is called a participant.
How many simultaneous ad hoc or Meetme conferences can support each Callmanager server?
The number of streams can be tuned up to 64 ad hoc conference participants and 128 meet-me conference participants on a standalone server (dependent on the server hardware platform).
How do I setup a conference call?
How can I start a conference call from my phone?Dial the first participant and wait for them to answer.Tap the “add call plus” button on your keypad.Dial the second participant and wait for them to answer.Tap the “merge calls” button.If you want to add more participants, repeat steps b to d.
How do you do a conference call on a Cisco IP Communicator?
Conference CallWhile on live call, click the More softkey on IP Communicator display.Click Confrn softkey.Type phone number 9+ 1+ 10 digit or 5 digit number.Click Confrn softkey after new call is on the other line.To remove yourself from the call, click End Call softkey.
How do I use meet me on my Cisco phone?
1: Pick up the handset and get a dialtone 2: Press the “more” softkey once to display the “Meet Me” tab. 3: Press the “Meet Me” softkey.
How do I join MeetMe meeting?
Dial the 10-digit number on a phone of your choice. The conference will beep once indicating that you have been connected. NOTE: MeetMe conferences do not require callers to enter a pass code.
What is conference bridge in Cucm?
Conference bridge for Cisco Unified Communications Manager is a software or hardware application that is designed to allow both ad hoc and meet-me voice conferencing. Additional conference bridge types support other types of conferences, including video conferences.
How do I merge two calls on a Cisco IP phone?
To combine calls that are on multiple phone lines (more than one line button is lit), press Join, then press the flashing green button for the line with the other call(s). If a line has multiple calls, you may need to press Select to choose which calls to join .
How do I make a conference call on Cisco Jabber?
Hover over the group name in the Jabber hub and click the telephone handset icon next to it. Click the Call button (a round green button with a telephone handset) next to the first member and choose either the phone number or email contact. Click the green Conference icon that appears for that person.
How do you do a 3 way call on a Cisco IP Phone 7942?
To create a three-party conference call:During a call, press the more soft key and then the Confrn soft key to open a new line and put the first party on hold.Place a call to another number.When the call connects, press Confrn again to add the new party to the call.
How do you conference call on VoIP?
How to Make a Conference Call From a VoIP PhoneStart your conference call by calling one participant.Once you’re connected to the first participant, press the “Confirm” button to add another party to the call.Dial the number for the second participant.More items…•
Introduction
This document provides an example of how to configure the Meet Me feature with User Authentication. The Meet Me feature is available in Cisco Unified Communications Manager (CUCM), and the Authentication is achieved with the help of Cisco Unity Connection (CUC).
Design
Meet Me conferences allow users to dial-in to a conference. This requires that a directory number be allocated for exclusive use of the conference. The users call the directory number in order to join the conference. Here Authentication is not required and the users are connected to the conference call.
Configure
For details on Voice Mail Profile Configuration and appropriate selection of Calling Search Space (CSS), refer to the SCCP Integration Guide or SIP Integration Guide.
Verify
There is currently no verification procedure available for this configuration.
Troubleshoot
There is currently no specific troubleshooting information available for this configuration.
What is meet me conferencing?
Hardware-based conferencing uses digital signal processors (DSPs) to allow more parties than software-based ad hoc conferencing, which is limited to only three parties . Meet-me conferencing requires a range of meet-me conference numbers that are created in the Cisco call-control system and allocated for exclusive use of the conference.
Does Cisco IOS support all features?
Your Cisco IOS software release may not support all of the features documented in this module. To reach links to specific feature documentation in this module and to see a list of the releases in which each feature is supported, use the “Feature Information for SCCP Meet-Me Conference” section.
What is a meet me conference?
The Cisco Unified Communications Manager administrator provides the Meet-Me conference directory number range to users , so that they can access the feature. The user chooses a directory number from the range that is specified for the Meet-Me Number or Pattern to establish a Meet-Me conference and becomes the conference controller.
What is a user that joins a conference called?
A user that sets up a conference is called the conference controller. A user that joins a conference is called a participant.
Introduction
This document covers the configuration procedure to implement secure conference bridge and Meet-Me conferences on Cisco Unified Communications Manager 8.x.
Configuring secure conference bridge
Secure conferencing allows a conference resource to be set up that uses encryption (SRTP).
Configuring Meet-Me conferences
Meet-Me conferences too can be secured by way of preventing non-secure devices from initiating a conference. Secure Meet-Me conferencing works by limiting access to Meet-Me conferences to devices that are secured.
Related Information
We would like to scan our CUCM using Nessus.I am would like to confirm on below 2 points.- Is it possible to scan CUCM using Nessus- Is it re recommended by Cisco I am not able to find out any related cisco documents or links . It would be grea… view more
